Instructions
&
&
Installation instructions
Trouble shooting
Not getting the speeds you want
 Make sure to select the best fit Ram Rod & Push Trigger enabling your marker to re-gas in between shots (through testing the best set up is to have the ram rod's front only just touching the marker's trigger at resting point + the ram rod's rear only just touching the Push trigger also at resting point)
Air in your tank, during testing markers would not cycle fast enough when the air tank fell to around 1000PSI. Although the marker would cycle single pulls.
The Hailstorm requires a Planet Eclipse 3 way valve minimum, it has been tested and proven to work with the DeadlyWind Valves V1 & V3 (V2 untested) be sure your marker has one of these installed.
Every marker has it's limits, the Hailstorm has been proven to fire 12 BPS on a stock Etha 3M. The push and pull motion requires speed and rhythm
My marker wont fire
Be sure your setup has the marker's trigger fully forward in its resting position and the selected Ram Rod is not too long stopping your marker's trigger from coming forward to its resting position.